|
|
PRO0030-6830 All-Rounded Power and Harmonics Three and Single Phase Analyser
|
|
PRO0030 BASE UNIT POWER AND HARMONICS ANALYZER WITH 3 x 1000A CLAMPS Optional: PRO0041- 3 x 3000A Flexible Clamps Optional: PRO0038- 3 x 100A Clamps |
Power analysers/Power meters
|
|
|
|
LUT0298-COMPLETE ADVANCED SD CARD GRAPHICAL/ WAVEFORM DATALOGGING 3-PHASE POWER & HARMONICS ANALYSER W 3 X 1200A CLAMP
|
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA /... |
Power analysers/Power meters
|
|
|
|
LUT0339-COMPLETE SD CARD KWH DATALOGGING 3-PHASE POWER ANALYSER/LOGGER W 3 X 1200A CLAMP - 2 YEARS WARRANTY
|
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio... |
Power analysers/Power meters
|
|
|
|
FLU0755 - Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version) malaysia fluke distributor 1111
|
|
Fluke 1734/B - Three-Phase Electrical Energy Logger with Fluke Connect (EU/US Version)
600V CAT IV/1000V CAT III rated for use at the service entrance and downstream
Power instrument directly from the measured circuit
Automatically capture and log voltage, current, power, power factor, energy and associated values
The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy... |
Power analysers/Power meters
|
|
|
|
CAX0135-CHAUVIN ARNOUX PEL113 (REPLACE OLD PEL103) POWER AND ENERGY LOGGER - CONTRACTORS KIT
|
|
SKU: CHAUPEL113PROKIT
PEL113 power and energy logger with current sensors, leads and Dataview software
Measure and records all data for energy consumption diagnostics
Hard carry case for equipment protection
Chauvin Arnoux PEL113 Power and Energy Logger - Contractors Kit
The Chauvin Arnoux PEL113 Power Energy Logger - Contractors Kit is the ideal kit needed for successful energy monitoring. Included within the kit is of course the PEL 113 Power Energy Logger and also current... |
Power analysers/Power meters
|
|
|
|
GRA007-GL220 10 Channel handy-type logger
|
|
10 isolated channels, each with multifunction input Its compact size contains an isolated input system which ensures that signals are not corrupted by inputs to other channels, thus eliminating wiring concerns. The GL220s multi-type inputs are suitable for voltage, temperature, humidity, pulse, and logic signals, enabling combined measurements of different phenomena like temperature/humidity and voltage. TOP Maximum sampling rate of up to 10ms Provides faster sampling... |
Datalogger/Recorders
|
|
|
|
GRA002- GRAPHTEC GL820 20 multi-channel logger (up to 200ch)
|
|
Data logger with 5.7'' color display, with 20 channels, expandable up to 200 ch,2GB on-board memory, USB/LAN PC I/F. 16-bit
Modular system allows expansion up to 200 channels
All channels are isolated, each with multifunction input
Huge built-in 2GB Flash memory
Large easy-to-read 5.7-inch TFT colour LCD
PC -friendly, supports USB memory stick, has USB and LAN ports
Description
Huge 2GB Flash Memory, modular system allows expansion up to 200 channels
Modular system... |
Datalogger/Recorders
|
|
|
|
GRA003-GL900 Multifunction logger (BNC)
|
|
An easy-to-use upright device enabling isolated 8-channel multifunction input, the GL900 is capable of performing high-speed simultaneous measurements of voltage, temperature, and various other phenomena.
+/-20 mV to +/-500 V
Thermocouples: K, J, E, T, R, S, B, N, W
0 to 100% (the B-530 option is required)
4 channels Count, Inst., Rpm
4 channels ‡ Select either Pulse or Logic
|
Datalogger/Recorders
|
|
|
|
LAS101 EL-USB-4 1-CHANNEL USB 4-20 MA DATA LOGGER
|
|
USB Current Logger Features
4-20mA Current Loop Measurement Range
Sampling Rates between 1s and 12hr
Stores 32,000 readings
Connection via two screw terminals
USB Interface for Set-up and Data Download
User-Programmable Alarm Thresholds
Red and Green LED Status Indication
Replaceable Internal Lithium Battery
EasyLog USB Current Logger Specifications
Data Storage Capacity
32,000 Samples/Readings
Measurement Range
4-20 mA dc
Internal Resolution
± 0.05 mA... |
Datalogger/Recorders
|
|
|
|
HOB401 U12 4 CHANNEL EXTERNAL INPUT DATA LOGGER (LOGGER ONLY)
|
|
Onset HOBO Data Logger Accepts External Sensors for Temperature, AC/DC Voltage, AC Current, 4-20mA, and CO2>> 4 External Inputs for Measuring and Recording Multiple Parameters>> 0 to 2.5 Volts DC, 0 to 5 Volts DC (w/ #CABLE-ADAP5), 0 to 10 Volts DC (w/ #CABLE-ADAP10) Measurement Ranges>> -20°C to 70°C (Temperature) and 0 to 95% RH (Humidity) Operating Range>> Stores up to 43,000 Measured Samples/Readings >> Sampling Rate of 1 Second to 18... |
Datalogger/Recorders
|
|
|
|
HOB403 U12 Outdoor/Industrial Data Logger with 4 External Channel Inputs
|
|
>> Weatherproof Enclosed Logger with 4 External Inputs for Measuring and Recording Multiple Parameters >> 0 to 2.5 Volts DC, 0 to 5 Volts DC (w/ #CABLE-ADAP5), 0 to 10 Volts DC (w/ #CABLE-ADAP10) Measurement Ranges >> -20°C to 70°C (Temperature) and 0 to 95% RH (Humidity) Operating Range >> Stores up to 43,000 Measured Samples/Readings >> Sampling Rate of 1 Second to 18 Hours Adjustable by User >> 1 Year Replaceable Battery Life >> Requires HOBOWare... |
Datalogger/Recorders
|
|
|
|
HOB404 U12-013 TEMP/RH/ 2 X EXTERNAL ANALOG INPUT DATA LOGGER
|
|
>> Temperature, Humidity with 2 External Analog Inputs for Current or DC Voltage Measurement >> 0 to 2.5 Volts DC, 0 to 5 Volts DC (w/ #CABLE-ADAP5), 0 to 10 Volts DC (w/ #CABLE-ADAP10) Measurement Ranges >> -20°C to 70°C (Temperature); 0 to 95% RH (Humidity); 1 to 3000 lumens/ft2 (Light) Operating Ranges >> Stores up to 43,000 Measured Samples/Readings >> Sampling Rate of 1 Second to 18 Hours Adjustable by User >> 1 Year Replaceable Battery Life... |
Datalogger/Recorders
|
|
|
|
HOB903 CABLE-4-20MA 4-20MA INPUT CABLE
|
|
4-20mA Input Cable >> Cable for Connecting Sensor with 4-20mA Output to Logger >> Length: 18.5" >> Use in Outdoor and Indoor Environments |
Datalogger/Recorders
|
|
|
|
HOB904 CABLE-ADAP10 0-10V INPUT CABLE
|
|
0 to 10 Volts DC External Input Cable>> Input Range: 0 to 10 Volts DC >> Impedence: 20 KΩ with 0.6 mV Resolution >> Cable: 13mm (0.5") Tinned Braided Wire Leads >> Cable Length: 1.9 Meters (6.3 feet) >> Indoor Use Only
|
Datalogger/Recorders
|
|
|
|
HOB906 U-DT-1 U SHUTTLE DATA TRANSPORTER/DATA COLLECTOR
|
|
The pocket-sized Shuttle provides a convenient way to readout and relaunch many of the HOBO data loggers and bring the data back to your host PC. The HOBO Shuttle works with the HOBO U-series loggers and HOBO Weather Stations and Micro Weather Stations.
Features
4 MB non-volatile memory, allowing you to readout many loggers (504 loggers with 8K memory - some Pendant Loggers) (63 loggers with 64K memory - most U-Series Loggers) (7 loggers with 512K memory - weather/micro stations and... |
Datalogger/Recorders
|
|
|
|
HOB402 U12-012 TEMP/RH/LIGHT/1 X EXTERNAL ANALOG DATA LOGGER (LOGGER ONLY)
|
|
The HOBO U12 Temp/RH/Light/External is a four-channel data logger that provides temperature, relative humidity, relative indoor light level measurements and accepts one external input.
>> Temperature, Humidity, Light with 1 External Analog Input for Current or DC Voltage Measurement >> 0 to 2.5 Volts DC, 0 to 5 Volts DC (w/ #CABLE-ADAP5), 0 to 10 Volts DC (w/ #CABLE-ADAP10) Measurement Ranges >> -20°C to 70°C (Temperature); 0 to 95% RH (Humidity); 1 to 3000 lumens/ft2... |
Datalogger/Recorders
|
|
|
|
HOB901/HOB902 SOFTWARE KIT FOR WINDOWS/MAC (INCLUDES SOFTWARE AND CABLE)
|
|
This totally new HOBOware for Windows supports all HOBO U-Series loggers, including HOBO Water Level and HOBO Pendant loggers; Onset's HOBO Weather Station and HOBO Micro Station; and incorporates valuable new capabilities such as scaling data to sensor units and saving graphs so they can be recalled and used in the future. In addition, HOBOware Pro includes Post-Processing Assistants, for Growing Degree Days and Grains per Pound. The USB Interface cable is included with the HOBOware... |
Datalogger/Recorders
|
|
|
|
LAS103 EL-USB-3 1-CHANNEL USB VOLTAGE DATA LOGGER
|
|
The EasyLog USB Voltage Data Logger measures and records voltage readings over a 0 to 30 Volts DC range. The Voltage Logger features 32K of data storage capacity, user selectable sampling rate and start time and direct usb connection to PC for downloading of data. The logger software allows for data to be graphed, printed and exported to other applications. Correct functioning of the unit is indicated by flashing red and green LED
USB Voltage Logger Includes >> Measurement Leads with... |
Datalogger/Recorders
|
|
|
|
GRA031-GRAPHTEC GL840MV2 20 CHANNELS STAND-ALONE LOGGER (GL-840-M)
|
|
20 channel data logger with 7" color display (TFT color LCD), 16-bit resolution, high isolation per channel (125 VAC RMS and 350 VDC channel-to-chassis), Up to 110Vp-p between ( ) and (-), withstands up to 350Vp-p (max 1min) channel-to-GND and between channels.
20 analog input channels, expandable to 200
4 discrete input channels
4 discrete alarm outputs
Optional WiFi wireless operation (Order B-568)
Communicate with up to (5) GL100 units with B-568 Wifi module
Flexible... |
Datalogger/Recorders
|
|
|
|
GRA044 - GRAPHTEC GL860/B-563 (GL-860) V3 ISOLATED DATA LOGGER - STARTERSET (REPL. OLD GL820,GL840)
|
|
***20-Channel Screw Input Terminal, expandable to 200Programmable per channel±20 mV to ±100 V over 12 rangesSupports direct-connected thermocouples of any typeSupports direct-connected PT100/PT1000 RTDs
*Sample SetupExpand from 20 channels to 200 channels. Requires the purchase of a connector cable, terminals, and terminal bases. All these items are sold separately. The example in this image shows a 70-channel configuration with three B-566 bases, a B-563 terminal (bottom), a B-563SL-30... |
Datalogger/Recorders
|
|